 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NLP250 Series Single output AC/DC POWER SUPPLIES * * * * * * * * * * * * 250 W AC/DC Universal Input Switch Mode Power Supplies NEW Product 1 Active PFC and EN61000-3-2 compliant 250 W on main channel with forced air Low profile fits 1U applications U-Channel for maximum thermal performance 5 V standby output 12 V fan output Integrated ORing diode Active current sharing Integrated control and monitoring features Overcurrent, overvoltage and overtemperature protection Compliance to EN55022-B conducted noise standard Available RoHS compliant The NLP250 series offers up to 250 W in a U-Channel power supply. Its form-factor makes it suitable for use in low-profile applications, such as 1U rack equipment. The main output channel is compatible with systems that implement distributed power and point-of-load architectures. It can also be used to power electromechanical devices such as relays, motors and print-heads. An auxiliary output is also available for those systems that require "standby" operation. The features of this power supply make it suitable for use in Information Technology Equipment (ITE) and light industrial systems. 2 YEAR WARRANTY All specifications are typical at nominal input, full load at 25 C unless otherwise stated. SPECIFICATIONS (8) OUTPUT SPECIFICATIONS Total regulation (line and load) Turn-on delay Transient response Main output Auxiliary outputs @ 120 Vac Input Main output 50-100% step at 0.5 A/s 2.0% 5.0% 2.0 s max. 5.0% or 250 mV max. dev., 1 ms max. recovery to 1% 0.02%/C Main outputs Cyclic operation Singles 5 Vsb 12 V (fan) 115%, 5% Continuous 0A 5 V @ 1.0 A 12 V @ 0.3 A EMC CHARACTERISTICS (continued) Radiated immunity Fast transients Surge Conducted immunity EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Level Level Level Level 3 3 3 3 GENERAL SPECIFICATIONS Hold-up time Efficiency Isolation voltage Safety approvals (See Note 6) Weight MTBF (@ 25 C) Telcordia SR-332 MIL-HDBK-217F (4) 85 Vac @ 60 Hz 115 Vac @ 250 W 230 Vac @ 250 W Input/output Input/chassis 20 ms @ 250 W 84% typ. 86% typ. 3000 Vac 1500 Vac Temperature coefficient Overvoltage protection Short circuit protection Minimum output current Auxiliary outputs (See Note 8) INPUT SPECIFICATIONS Input voltage range Input frequency range Input surge current Safety ground leakage current Input current Input fuse 264 Vac (cold start) 264 Vac, 50 Hz 120 Vac @ 250 W 230 Vac @ 250 W UL/IEC127 (5) UL/cUL UL60950-1, VDE EN60950-1 CAN/CSA22.2 No. 60950-1 650g (22oz) 317,000 hours min. 158,000 hours min. Universal input 85-264 Vac 47-63 Hz 40 A max. 1 mA 2.78 A rms 1.36 A rms T6.3 AH, 250 Vac Relative humidity Level B Compliant Level 3 Level 3 Altitude Vibration (See Note 7) Shock ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating ambient, 0 C to +70 C (See derating curve) Non-operating -40 C to +85 C 250 W 0 C to 50 C ambient, 200 LFM forced air 175 W 0 C to 50 C ambient, convection cooled 50 C to 70 C ambient, Derate linearly to 50% load convection cooled Non-condensing Operating Non-operating 5-500 Hz per MIL-STD-810E 5-95% RH 10,000 feet max. 30,000 feet max. 2.4 G rms peak 516.4 Part IV EMC CHARACTERISTICS Conducted emissions Harmonic current Correction ESD air ESD contact EN55022, FCC part 15 EN61000-3-2 EN61000-4-2 EN61000-4-2 File Name: nlp250.pdf Rev: 29 May 2006 NLP250 Series Single output AC/DC POWER SUPPLIES 250 W AC/DC Universal Input Switch Mode Power Supplies NEW Product 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT VOLTAGE 12 V 24 V 48 V Notes Free air convection. Maximum continuous output power not to exceed 175 W. Refer to Figure 1 for the derating curve. 2 200 LFM forced air cooling from the longer side. Maximum continuous output power not to exceed 250 W. 3 Figure is peak-to-peak for room temperature rating. Output noise measurements are made across a 20 MHz bandwidth using a 6 inch twisted pair, terminated with a 10 F tantalum capacitor and a 0.1 F ceramic capacitor. 4 CAUTION: Allow a minimum of 1 second after disconnecting line power when making thermal measurements. For optimum reliability no part of the heatsink should exceed 115 C and no semi-conductor case temperature should exceed 120 C. 5 No external filtering required during conducted emissions testing but some applications may require additional filtering to achieve system compliance. Compliance with radiated EMI specifications may require mounting in a suitable enclosure. 6 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 7 Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G 8 5 V sb (standby) output is available whenever AC is present, regardless of remote ON/OFF signal status. 12 V (fan) present when main output is present. 9 The `J' suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 10 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. 1 DERATING CURVE Output Power (Watts) OUTPUT CURRENT RIPPLE MIN 0A 0A 0A MAX (free air) (1,4) MAX (forced air) (2,4) 14.6 A 7.3 A 3.65 A 21 A 10.5 A 5.25 A 120 mV 240 mV 480 mV (3) TOTAL REGULATION 2.0% 2.0% 2.0% MODEL NUMBERS (9,10) NLP250R-96S12J NLP250R-96S24J NLP250R-96S48J All Models Forced Air 250 W 200 LFM (1.0 m/s) FORCED AIR COOLING 175 W 24/48 V Free Air 12 V Free Air 125 W NATURAL FREE AIR 87 W 75 W 0W 0 C 10 C 20 C 30 C 40 C 50 C 60 C 70 C Figure 1: Derating Curve CUSTOMER MOUNTING HOLES MAX. SCREW PENETRATION 0.08IN 6-32 J1 G L N 1 1.140 (28.96) 4.000 (101.60) J3 JP1 VR7 J4 J2 1 0.750 (19.05) M3.0 5.850 (148.59) 1 0.25 (6.35) 6.250 (158.75) M3.0 4 PLACES 7.000 [177.80] 6-32 4 PLACES 4.700 (119.38) 1.500 [38.10] 5.500 (139.70) BOTTOM VIEW Figure 2: Mechanical Drawing File Name: nlp250.pdf Rev: 29 May 2006 2.500 (63.50) NLP250 Series Single output AC/DC POWER SUPPLIES 250 W AC/DC Universal Input Switch Mode Power Supplies NEW Product 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm CONNECTOR AND MATING CONNECTOR TYPES MATING CONNECTOR TYPE CONNECTOR J1 J2 J3 J4 TYPE Molex 09-65-2058 (5273 series) void pins 2 and 4 or equivalent Molex 22-23-2021 (6373 series) or equivalent Molex terminal block 387007504 or equivalent Molex 22-23-2091 (6373 series) or equivalent Molex 09-52-4054 (5239 series) or equivalent with Molex 08-52-0072 (2478 series) or equivalent crimp terminals Molex 22-01-3027 (2695 series) or equivalent with Molex 08-50-01113 (2759 series) or equivalent crimp terminals Terminal block contains #6-32 screw with clamp washer suitable for wire size 12-22 awg (0.5-2.5 mm2). Max Torque tp 1.36 Nm (12 in.lb) Molex 22-01-3097 (2695 series) or equivalent with Molex 08-50-0113 (2759 series) or equivalent crimp terminals J1 PIN CONNECTIONS Pin 1 Ground/Earth Pin 2 Live Pin 3 Neutral Pin 1 Pin 2 J2 PIN CONNECTIONS +12 V Fan Voltage SGND Return Pin Pin Pin Pin 1 2 3 4 J3 PIN CONNECTIONS Vo +Main Output Vo +Main Output RTN Main Return RTN Main Return Pin Pin Pin Pin Pin Pin Pin Pin Pin 1 2 3 4 5 6 7 8 9 J4 PIN CONNECTIONS +S +Vo Remote Sense -S -Vo Remote Sense LS Load Share Signal PS OFF Remote ON/OFF signal NO PS ON Remote ON/OFF signal NC SGND Signal Common PW OK Power Good 5 Vsb DC OK Stand-by Voltage DC Power Good Signal International Safety Standard Approvals VDE0805/EN60950-1/IEC950/IEC60950-1 File No. 1040100-3336-0210 UL/cUL 60950-1/CSA-C22.2 60950-1 File No. E135734 Certificate No. 40014041 IECEE CB Ref DE1-32468 Datasheet (c) Artesyn Technologies(R) 2006 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note www.artesyn.com File Name: nlp250.pdf Rev: 29 May 2006 |
Price & Availability of NLP250R-96S48J
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |